Abhisek Pradhan, Boddepalli Durga Rao and Trilochan Rout
Abstract
The HDPE (High density polyethylene) composite can be considered for lightweight applications at low temperatures. The HDPE/CNT (Carbon nanotube) composite is prepared with weight variation of CNT as 0.04 and 0.12 wt.% through sonication (>20 k Hz) and magnetic stirring followed by injection molding. The Cu micro powder is added with HDPE with same composition and injection molded. The pin-on-disc wear tester showed significant improvement in wear resistance and wear amount in both the composites compared to pure HDPE. The hardness test also showed improvements carried out at digital Rockwell hardness tester.
Published on: April 30, 2023
doi: 10.17756/nwj.2023-s1-095
Citation: Pradhan A, Rao BD, Rout T. 2023. Comparative Study of Wear Performance Between High Density Polyethylene and Reinforced High Density Polyethylene. NanoWorld J 9(S1): S495-S498.
doi: 10.17756/nwj.2023-s1-095
Citation: Pradhan A, Rao BD, Rout T. 2023. Comparative Study of Wear Performance Between High Density Polyethylene and Reinforced High Density Polyethylene. NanoWorld J 9(S1): S495-S498.
Download Citation (XML)68 Downloads
